If you are not sure about a program and want to run it. this is the perfect solution.
Sandboxie allows you to run programs without affecting the system. You can download it for free by visiting www.sandboxie.com. But if you want following features, will have to pay €29 Euros
- Is personal and is not transferable into computers or electronic media that you do not own;
- But does permit you to use Sandboxie on any number of computers that you personally own;
- Removes the nag screen that initially appears after you have used Sandboxie for more than 30 days;
- Enables the Forced Programs and Forced Folders features;
- Allows you to run programs in more than one sandbox at the same time (see message SBIE1303);
- But does not entitle you to any guaranteed level of technical support.
Introduction to Sandboxie
Sandboxie runs your programs in an isolated space which prevents them from making permanent changes to other programs and data in your computer.
The red arrows indicate changes flowing from a running program into your computer. The box labeled Hard disk (no sandbox) shows changes by a program running normally. The box labeled Hard disk (with sandbox) shows changes by a program running under Sandboxie. The animation illustrates that Sandboxie is able to intercept the changes and isolate them within a sandbox, depicted as a yellow rectangle. It also illustrates that grouping the changes together makes it easy to delete all of them at once.
Benefits of the Isolated Sandbox
- Secure Web Browsing: Running your Web browser under the protection of Sandboxie means that all malicious software downloaded by the browser is trapped in the sandbox and can be discarded trivially.
- Enhanced Privacy: Browsing history, cookies, and cached temporary files collected while Web browsing stay in the sandbox and don’t leak into Windows.
- Secure E-mail: Viruses and other malicious software that might be hiding in your email can’t break out of the sandbox and can’t infect your real system.
- Windows Stays Lean: Prevent wear-and-tear in Windows by installing software into an isolated sandbox.
Running Application inside Sandboxie
Running application inside Sandboxie is so simple. You can right click on program icon > Run Sandboxed
If you open sandboxie, will able to see which programs are running on.
More Info
Tutorial: Getting Started with Sandboxie
General Usage Tips for using Sandboxie
Usage Manual for Sandboxie Control
Known Conflicts with other programs
Reference for error and informational SBIE Messages
Sandboxie Start Command Line parameters
Configuring Sandboxie through Sandboxie Ini
If your WAMP Server System tray Icon turned into yellow 
and not working, Try following steps.
1. Click on WAMPServer System tray icon > Restart All Services
If icon still appears yellow,
2. Click on Icon > Apache > Service > Test Port 80 and See which program blocks WAMP/Apache default port 80
In my PC, I have installed Skype and it uses port 80 to do communication. You can change it by Opening Skype > Tools > Options > Advanced > Connections
Uncheck “Use port 80 and 443 as alternatives for incoming connections.” And Restart WAMP.
If problem still exists,
3. Click on WAMP icon > Apache > httpd.conf
Search for “Listen 80″ in the file. and replace “80″ with “81″ one or some other port number you want. And restart WAMP.
If default port is changed, you will have to add port number at the end of “localhost” to access. Ex – “http://localhost:81/”
1. Download and Install Notepad ++ if you don’t have.
http://sourceforge.net/projects/notepad-plus/files/
2. Download and Install MinGW compiler and JDK.
http://www.mingw.org/
http://java.sun.com/javase/downloads/index.jsp
3. Set Up environment variable for compiler.
4. Download and Extract these files to Notepad ++ installation directory.
http://www.mediafire.com/?zzt1ongn2wn
5. Open Notepad ++, Goto Run > Run …
6. Paste these into text box there one by one and click “Save”.
Compile (C)
“$(NPP_DIRECTORY)\compilec.bat” $(CURRENT_DIRECTORY) $(FILE_NAME) $(NAME_PART)
Run (C)
“$(NPP_DIRECTORY)\runc.bat” $(CURRENT_DIRECTORY) $(NAME_PART)
Compile (Java)
“$(NPP_DIRECTORY)\compilejava.bat” $(CURRENT_DIRECTORY) $(FILE_NAME)
Run (Java)
“$(NPP_DIRECTORY)\run.bat” $(CURRENT_DIRECTORY) $(NAME_PART)
7. If you done all correctly, new Features will appear on Run menu.
Crack/Decrypt MD5 or NTLM hash is very simple. Only you want to do is goto http://www.md5decrypter.co.uk and submit hash they will Crack/Decrypt it for free.
What is MD5 ?
In cryptography, MD5 (Message-Digest algorithm 5) is a widely-used cryptographic hash function with a 128-bit hash value. MD5 was designed by Ronald Rivest in 1991 to replace an earlier hash function, MD4. As an Internet standard, MD5 has been employed in a wide variety of security applications, and is also commonly used to check the integrity of files.
What is NTLM ?
NTLM (NT LAN Manager) (not to be confused with LAN Manager) is a Microsoft authentication protocol used with the SMB protocol.
How to Spoof Webcam
Here is a Simple way to spoof (stream video through webcam).
1. Download and Install ManyCam Virtual Webcam – http://download.cnet.com/ManyCam-Virtual-Webcam/3000-2348_4-10593500.html?tag=mncol (freeware, spyware free – certified and reviewed by CNET)
2. Run your messenger software (MSN, Yahoo etc.)
3. In your Messenger settings, set ManyCam as your primary webcam. (eg. MSN : Tools > Audio and Video Setup)
4. Run ManyCam.
5. Goto Sources > Movies >Open New file (select video file and click ok)
6. Then you can have Fun with friends by showing webcam. (Whatever you play in ManyCam will display in your Messenger.)
Warning : Use this only for FOR EDUCATIONAL PURPOSES ONLY!
UPDATE WITH CLEAN TOOL (7-June-2010)
1. Download and Extract SQLi Helper. (Donet Framework 2 is required)
2. Find vulnerable site for SQL injection.
3. Open SQLiHelper and paste site URL into Target box.
4. Click “Inject” Button.
5. After Injection is finished. It will show you sever info in a box of right side top corner.
6. Next Click “Get Tables” button.
7. After clicking “Get Database” button It will list avalable databases on server.
8. Select database you want and click “Get Tables” button. Then it will display Table list of database.
9. After table listing is completed select table you want and click “Get Columns” button.
10. Now you can select columns and click “Dump now” button. It dump all data stored in selected columns….
11. Congratz. you have successfully done a SQL Injection.
(Leave a message If you have any problem)
UPDATED (7-June-2010)
- Download SQLi/XSS/LFI/RFI Scanner from here.
- Extract RAR file.
- Download and Install Dotnet Framework If you haven’t.
- Run ExploitScanner.exe
- Put search string you want to search, as dork. (for example i’ll use details.php?id)index.php?id=trainers.php?id=
buy.php?category=
article.php?ID=
play_old.php?id=
newsitem.php?num=
readnews.php?id=
top10.php?cat=
historialeer.php?num=
reagir.php?num=
Stray-Questions-View.php?num=
forum_bds.php?num=
game.php?id=
view_product.php?id=
newsone.php?id=
sw_comment.php?id=
news.php?id=
avd_start.php?avd=
event.php?id=
product-item.php?id=
sql.php?id=
news_view.php?id=
select_biblio.php?id=
humor.php?id=
aboutbook.php?id=
ogl_inet.php?ogl_id=
fiche_spectacle.php?id=
communique_detail.php?id=
sem.php3?id=
kategorie.php4?id=
news.php?id=
index.php?id=
faq2.php?id=
show_an.php?id=
preview.php?id=
loadpsb.php?id=
opinions.php?id=
spr.php?id=
pages.php?id=
announce.php?id=
clanek.php4?id=
participant.php?id=
download.php?id=
main.php?id=
review.php?id=
chappies.php?id=
read.php?id=
prod_detail.php?id=
viewphoto.php?id=
article.php?id=
person.php?id=
productinfo.php?id=
showimg.php?id=
view.php?id=
website.php?id=
hosting_info.php?id=
gallery.php?id=
rub.php?idr=
view_faq.php?id=
artikelinfo.php?id=
detail.php?ID=
index.php?=
profile_view.php?id=
category.php?id=
publications.php?id=
fellows.php?id=
downloads_info.php?id=
prod_info.php?id=
shop.php?do=part&id=
productinfo.php?id=
collectionitem.php?id=
band_info.php?id=
product.php?id=
releases.php?id=
ray.php?id=
produit.php?id=
pop.php?id=
shopping.php?id=
productdetail.php?id=
post.php?id=
viewshowdetail.php?id=
clubpage.php?id=
memberInfo.php?id=
section.php?id=
theme.php?id=
page.php?id=
shredder-categories.php?id=
tradeCategory.php?id=
product_ranges_view.php?ID=
shop_category.php?id=
transcript.php?id=
channel_id=
item_id=
newsid=
trainers.php?id=
news-full.php?id=
news_display.php?getid=
index2.php?option=
readnews.php?id=
top10.php?cat=
newsone.php?id=
event.php?id=
product-item.php?id=
sql.php?id=
aboutbook.php?id=
preview.php?id=
loadpsb.php?id=
pages.php?id=
clanek.php4?id=
announce.php?id=
chappies.php?id=
read.php?id=
viewapp.php?id=
viewphoto.php?id=
rub.php?idr=
galeri_info.php?l=
review.php?id=
iniziativa.php?in=
curriculum.php?id=
labels.php?id=
story.php?id=
look.php?ID=
newsone.php?id=
aboutbook.php?id=
- Change Max Url and Thread count If you want (not necessary, i’ll leave it as 100 and 5)
- Keep SQLi Error Based checked.
- That’s all, now click “Scan Sites” button. It will search through internet and find sites with given dork.
- After the search is completed it will show list of sites.
- Then click “Test Sites” button. it will scan sites from the list and show you which are vulnerable.
- Finaly you can see vulnerable site list on right side box.
Please also note that you run this procedure at your own risk; although I have performed this with perfect results there is always the possibility when flashing your phone that you may damage it.
1. Install Nokia PC Suite with all Drivers (Make sure Nokia PC Suite woking well when your Mobile plugged in PC Suie Mode)
2. Download and Install Nemesis Service Suite and Nokia Software Updater
3. Plug your Mobile phone in “PC Suite” Mode
4. Open Nemesis Service Suite
5. Click “Scan for New Device Button”
if you done all correctly.. you will get this.. (blinking “Ready”)
6. Click and goto “Phone Info”
7. Then Click “Scan” button
8. Put Generic Nokia code (UK – 0534841) in product code box and check enabled infront of it..
9. Next Click “Write” button.. and wait until it complete… then click “Read” and check code saved there….
10. Now All are ok.. You have made debrand code but not the os. now use Nokia Software Updater and Install latest firmwire on mobile…
1. Download Data.zip from here. It is Pre-configed Windows 3.1 Installation, that means you have no need to do complex configurations.
2. Extract Data.zip to your Phone Memory Card
(As you can see in above image, you must put Data folder into Memory Card Root)
3. Download Install.zip from here. Inside that you can see some Symbian Applications. Install all those into your Mobile phone one by one.
4. Next you have to Install DOSBox into Mobile Phone.
Download : dosbox_s60_20090623.zip
Install :
- Uninstall previous DOSBox versions (if you have installed).
- Install DOSBox-Full for phones with High memory (Nokia N95-2, N82 or similar). for phones with Low Memory (Nokia N95-1) Install DOSBox-Slim.
Now Its Time to Boot your Windows, Run DOSBox Application. Have Fun
Keys :
Receive Call (Green) – Switching Mode (switch between the mouse and the keyboard)
End Call (Red) – Exit from DOSBox
Pen Key – Shift
Delete (C) – Backspace
Thumb Pad – Arrow Keys, Enter
Right Key – Escape
Left Key – Space
Mode 1:
First line keys = a d g j m p t w space
First line keys + Pen =: A D G J M P T W space
Second line keys + * = b e h k n q u x .
Second line keys + * = Pen + * B E H K N Q U X
Third line keys + # = c f i l o r v y \
Third line keys + Pen + # = C F I L O R V Y |
Fourth line keys + 1 = s z
Fourth line keys + Pen + 1 = S Z
Mode 2:
Numbers = 1 2 3 4 5 6 7 8 9 0
Numbers + Pen = ! @ # $ % ^ & * ( )
Mode 3:
Thumb Pad – Moving mouse
* = Right mouse button
# = Left mouse button
Configurations :
1. To change DOSBox allocated 8MB RAM edit line ‘memsize=8′ in file ‘e:\Data\dosbox.conf’.
2. If your mobile phone have enough RAM memory you can install Sound Blaster 16 driver:
Control Panel -> Drivers -> Add -> Creative Lab Sound Blaster 1.5 -> Restart
I have tested this on N95-1 without any errors, If you have any problems just leave a comment below.
